18 Amp Panel Mount Battery Charger & Tester for 12V Trailer Batteries

I know there are many of you that own dump trailers that have gone tru the dead batteries, the belching hydraulic fluid, That is because the manufactures are putting anywhere 1.5 Amp and a 5 Amp Charger on their dump trailer, So lets say you use that trailer that day and use let's say 300 Amps, using your 1.5A unit it will take you 8.3 Days to bring it back up, If you have a 5 Amp Charger that 2.5 Days to bring it back, How is a person going to work this you need your trailer every day, Here it is. This 18 Amp unit is it, That same 300 Amps you sucked out this replaces in just 16 Hours.

This charger a 12V battery with 3 charging steps by PWM technology(Pulse Width Modulation) as follow

1)Constant-Current-Charge -when the battery voltage is lower than set point, it will charge the battery at the max, current which is called quick charging.

2)Constant- voltage-charge- when the battery is almost fully charged, the charger will limit the current automatically

3)Float Charge-when the battery voltage reaches the setted float voltage of 13.5V it will automatically switch to the float charging condition with current of 0.1A0.2A

• Input: AC 120V, 60Hz
• Output: DC 12V
• Charge Current: Max 18 Amps
• Efficiency: >90%
• Battery Cables: 24-inch, 16 AWG

https://www.trucktrailerandhitchkc.com/kansas-city-inventory/dump-trailers?show=30

For questions on this trailer give me a call 816 763 0663




SE HABLA ESPANOL-PREGUNTE POR FERNANDO